Original Autel MaxiBAS BT506 Auto Battery and Electrical System Analysis Tool Works with Autel MaxiSys Tablet (Chinese Version)

Highlights:

1. Autel Tablets supports Battery Test via work with BT506:
MK808BT,MK808BT PRO, MK808Z-BT, MK808K-BT,MK900-BT, MX808TS, MX808S-TS, MX900-TS, MK808TS, MK808S-TS, MK808Z-TS, MK900-TS, DS808S-BT, DS808TS, DS808S-TS, MP808TS, MP808S-TS, MP808Z-TS, MP900-TS, MP808BT, MP808BT Pro, MP900-BT, MP900Z-BT, MS906S, MS906TS, MS906BT, MK906BT, MS906 Pro, MS906 PRO-TS, MK906 PRO, MK906S Pro, MK906 Pro-TS, MK906S Pro-TS, MS908S Pro, MS908S II, MS908S PRO II, MK908 II, MK908 PRO II, MaxiSys Elite, MaxiSys Elite II, MaxiSys Eltie II Pro, MS909, MS919, Ultra, Ultra Lite.
2. Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
3. Test 6- and 12-volt batteries: 100 - 2000 CCA
4. Test 12- and 24- cranking/charging systems
5. Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
6. Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA

Note:

1. Our BT506 Can Not Be Used With Mobile Phone APP
2. The BT506 Does Not Have a Screen! To Perform Testing and Display Test Results the BT506 Must be Used with Autel MaxiSys MS906 and Higher Level Tablet Tools.



BT506 Description:

The BT506 does not have a screen! To perform testing and display test results the BT506 must be used with an Autel MaxiSys tablet or other smart devices (free iOS or Android apps available).
AUTEL MaxiBAS BT506 is a battery and electrical system analysis tool that enables technicians to view the health status of vehicle's battery and electrical system. It is not an average battery tester because it measures not only the state of charge but also the battery state of health including its capacity, its ability to maintain and store the energy. Using adaptive conductance (an advanced battery analysis method), AUTEL MaxiBAS BT506 can produce a more accurate examination of the battery's cold cranking ability and reserve capacity, which is vital to determine a battery's true health.

Tip: click here to free download BT506 User Manual.
Free Download Autel-MaxiBAS-comparison-chart. PDF, click here.
Download Free App from Google Play and the App Store



The BT506 is a new app-based battery analysis tool developed by Autel.

Download the free and easy-to-use mobile app, available for iOS and Android devices, and use it with the BT506 to perform testing and display test results.

BT506 has positive and negative alligator clamps which are polarity protected, so even if you reverse the clamps and put the negative on the positive terminal, it is OK. In fact, the LED on the tester is color coded to alert the users of connection and testing status, so the testers will flash red to alert you that you have made the error.

Battery Health Report / Temperature Compensation / Cloud-based Service

Battery Ratings: CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
Test Flooded, AGM, AGM_Spiral, EFB, and GEL Batteries
In-vehicle testing of Battery, Starter, Charging system voltage (not amps)
Out-of-vehicle Battery testing
Test 6- and 12-volt Batteries: 100 - 2000 CCA
Test 12- and 24-volt Cranking/Charging Systems

Cranking And Charging System Test

BT506 Battery Tester can test battery and also 12- and 24-volt Cranking/Charging Systems( starter and alternator), Same as BT608.

1. In-Vehicle Test:

* Battery Test:
With the clear guidance on the screen, you can do the battery test. And the battery test results include a color-coded result summary, a list of test data such as SOC, Voltage, Measure Capacity, and repair tips.
Starter Test: Follow the on-screen instructions, start the engine and let it idle. Then the test results of the cranking system will display on the screen which include starting voltage, starting current and starting time.

* Generator Test:
Through the alternator test, technicians are able to check the load voltage/current, no load voltage/current, and ripple. The direct test result on the screen will tell you whether the charging is normal, and whether there is an issue with the output or ripple, which helps avoid damaging the battery and shortening its life due to overcharging or incomplete charging.

2. Out-Vehicle Test:

Out-vehicle test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.

3. Automativally Identify Battery Type:

Clamp the BT506 to a in-vehicle battery, the vehicle information will be automatically populated and its battery information tab will pop up from the bottom of the screen, select the correct battery parameters on the screen to process the diagnosis.

* BatteryTypes: FLOODED, AGM, AGM SPIRAL, EFB, and GEL;
* Standards: CCA, SAE, CA, EN, IEC, DIN, JIS and MCA.



BT506 vs. BT508 vs. BT608 vs. BT609 Comparison

Item		Autel BT506	Autel BT508	Autel BT608	Autel BT609
Software	Operating System	×	×	Android 9.0	Android 9.0
Hardware	Screen	×	×	5.5-inch touchscreen/ 720*1280	7.0-inch touchscreen/ 1280*800
	Processor	Cortex-M4	Cortex-M4	Cotex-A35 Quad-core, 1.5Ghz	Cotex-A35 Quad-core, 1.5Ghz
	Memory/RAM	×	×	32GB/2GB	64GB/2GB
	Battery	×	×	3000mAh, 6H	6000mAh, 6H
	Camera	×	×	8mp	8mp
Features	CCA Range	100-2000 CCA	100-2000 CCA	100-3000 CCA	100-3000 CCA
	Battery Type	Flooded, AGM, AGM Spiral, EFB, GEL	Flooded, AGM, AGM Spiral, EFB, GEL	Flooded, AGM, AGM Spiral, EFB, GEL	Flooded, AGM, AGM Spiral, EFB, GEL
	Battery Ratings	CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB	CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB	CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB	CCA, CA, MCA, JIS, DIN, SAE, IEC, EN, EN2, BCI, GB
	Battery Voltage	6V, 12V	6V, 12V	6V, 12V	6V, 12V
	Electrical System	12V, 24V	12V, 24V	12V, 24V	12V, 24V
	Voltage Range	1.5V-36V	1.5V-36V	1.5V-36V	1.5V-36V
	Temperature Compensation	√	√	√	√
	Battery Registration	×	53 vehicle makes	53 vehicle makes	53 vehicle makes
	Electrical Reset	×	√	√	√
	System Detection	×	AutoVIN	AutoVIN, VINScan, Plate Scan	AutoVIN, VINScan, Plate Scan
	Battery Location Diagrams	√	√	√	√
	Battery Health Report	×	√	√	√
	Built-in Printer	×	×	√	×
	Email Report	√	√	√	√
	Cloud-base Service	√	√	√	√
	Multimeter	×	×	Optional	Optional
	Amp Clamp	×	×	Optional	Optional
Diagnostics	All System Diagnostics With AutoSCAN	×	√ (One vehicle brand ONLY)	√	√
	All Maintenance Service Resets	×	×	×	√
	Diagnostic Software Update	×	Change for additional vehicle brands and annual update	No annual update fee	Annual update fee

Specification:

Item	Description
Connectivity	USB 2.0, Type C
	Bluetooth V3.0 BR/EDR+ V4.2 LE Dual-Mode
Input Voltage	5 V DC
Working Current	< 150 mA at 12 V DC
Internal Battery	N/A
CCA Range	100 to 2000 A
Voltage Range	6 to 36 V
Working Temperature	-10°to 50° C (14° to 122° F)
Storage Temperature	-20° to 60° C (-4° to 140° F)
Dimension (L x W x H)	107 mm (4.21“) x 75 mm (2.95”) x 26 mm (1.02”) (clamp cable not included)
Weight	320 g (0.7 lb.)

Package includes:

1pc x MaxiBAS BT506 Unit with Battery Cable (Approx 2-FT Long) with Large Clamps (Low Profile) and Temperature Sensor