cart

Autel MaxiCOM MK908P Display


Autel MaxiCOM MK908P Display
Autel MaxiCOM MK908P Display
MK908P Product Display
1. 10.1 - inch Capacitive Touchscreen
2. Ambient Light Sensor - detects ambient brightness
3. LED - indicates battery level & charging or system status
4. Microphone
The power LED displays green, yellow, or red depending on power level and operating state. 
A. Green
* Illuminates green when the Display Tablet is charging and the battery level is above 90%. 
* Illuminates green when the Display Tablet is powered on and the battery level is above 15%.
B. Yellow
* Illuminates yellow when the Display Tablet is charging and the battery level is below 90%.
C. Red
* Illuminates red when the Display Tablet is powered on and the battery level is below 15%.
MK908P tablet
5. Collapsible Stand – extends from the back to allow hands-free viewing of the Display Tablet. 
6. Built-in Battery
7. Loudspeaker
8. Camera
9. Camera Flash
MK908P interfaces
10. DC Power Supply Input Port
11. Headphone Jack
12. USB Port
13. HDMI (high-definition multimedia interface) Port
14. USB Port
15. Mini USB Port
16. Lock/Power Button – turns the MaxiCOM tool on and off with long press, or locks the screen with short press
MK908P display

1. DC Power Supply Input Port
2. Vehicle Data Connector
3. Vehicle LED
Flashes green when communicating with the vehicle's system

IMPORTANT: Do not disconnect the reprogramming device while this status light is on! If the flash reprogramming procedure is interrupted while the vehicle's ECU is blank or only partially programmed, the module may be unrecoverable. 

4. Connection LED
* Illuminates solid green when properly connected with the display tablet via the USB cable
* Illuminates solid blue when connected with the display tablet via wireless (BT) connection
5. Power LED
* Illuminates solid green when powered on 
* Flashes red when a system failure occurs
* Illuminates amber automatically at power-up when the device is performing a self-test procedure
6. USB Port