Autel KM100 Program 2022 Hyundai Tucson All Keys Lost
Learn how to program the 2022 Hyundai Tucson(NX4) with all keys lost with Autel KM100 via OBD.
Autel MaxiIM KM100 Key Fob Programming Tool can successfully program 2022 Hyundai Tucson(NX4) all keys lost by OBD. Besides it can also read passwords for keyless systems. Detailed support list please refer to the chart below:KM100 Hyundai TUCSON(NX4) IMMO List
| Year | System | Add key | All keys lost | Read password | Remote learning |
| 2022 | Immobilizer | √(by OBD) | √(by OBD) | × | √(by OBD) |
| 2022 | Keyless system | √(by OBD) | √(by OBD) | √(by OBD) | Not required |
| 2023- | Immobilizer | √(by OBD) | √(by OBD) | × | √(by OBD) |
| 2023- | Keyless system | √(by OBD) | √(by OBD) | × | Not required |
Procedure
- Generate Key
Put an Autel IKEY Remote into KM100 key slot...
Completed.
- Program All Keys Lost
IMMO >> Hyundai >> TUCSON(NX4) >> 2022- >> Smart key >> Yes >> Immo status scan >> All keys lost(guided) >> Start
This function supports adding keys and all keys lost.
Performing this function will erase all existing keys, all the old keys must be relearned again to be able to use normally.
Press "Yes" to continue.
Turn the ignition off. (Note: the screen of the instrument is black.)
Open and then close the driver's door once!
Please enter the 6-digit security code on Autel KM100.
Note! Click "OK" to complete the following steps:
Within 5s after OK is pressed, use the back or top of the smart key to hold down the START button for 5s until the anti-theft lamps flash.
(If the operation failed with the prompts, please remove the key case and re-execute the above steps so that the key chip can be successfully programmed.)
Programming succeeded.
Test the new key, it does work normally.
Done.
